Operation steps and precautions for use of automatic screw locking machine

The screwing Machine simplifies the screw fastening process through equipment, reducing the number of labor and reducing the undesirable factors caused by manual misoperation. Next, let's take a look at the operation steps and precautions of the automatic screw locking machine. Here are some answers.

Here is the content list:

l What are the operating steps for an automatic screw locking machine?

l What are the precautions for using an automatic screw locking machine?

What are the operating steps for an automatic screw locking machine?

supply

The automatic screw locking machine uses rollers, hook screws, turbines, and vibrating disks to load materials. Arrange the screws in order on the vibrating guide rail, transport them to the screw distribution system, and transport the distributed screws to the lock nozzle through air pipe pressure. Manually pour the screws into the bin slot of the feeding mechanism.

Lock payment

The electric screw of the screw tightening machine can move up and down, left and right, back and forth in the space of the table. The spindle has upper and lower limiters. Move the batch nozzle above the screw hole and fix the limiter to ensure that the batch nozzle will not touch and scratch products. After aligning the screw holes, the machine drives the electric screwdriver to press down. The electric screwdriver has the function of pressing down to start, and the screw touches the screw hole to automatically start the electric screwdriver and complete the lock. When the locking is finished, the electric batch will automatically stop rotating, the machine will lift the electric batch, the screw will be automatically sent to the batch nozzle, and the automatic screw-locking machine will move the electric batch to the next screw hole to continue to lock the screw. The feeding mechanism sorts the screws and distributes the screws through the distributor, and the pipe sends the screws to the electric or pneumatic screwdriver. The screw is locked into the locking system in the product by an electric or pneumatic screwdriver.

What are the precautions for using an automatic screw locking machine?

First, it is necessary to keep the electric screwdriver's nosepiece sliding smoothly on the electric screwdriver's mouth. Otherwise, it will be difficult for the screws to enter the electric screwdriver's nose and mouth, which will affect the use of the screw dispenser machine. Second, do not bend the screw conveying pipe. Otherwise, the screw will get stuck in the bend during the screw conveying process. Third, you must wait for the torque of the electric screwdriver to reach the set torque, and then lift the electric screwdriver after the electric screwdriver stops automatically. Otherwise, the screw driver machine will not act and send a screw to the nose of the electric screwdriver to be locked. Fourth, if you find that the screw twisting machine does not send a screw to the nose and mouth of the electric screwdriver, you can re-tap a locked screw once, or manually send the screw button once manually, and let the screwing machine send a screw to the electric screwdriver. The nose and mouth are to be locked. Fifth, the air pressure cannot be adjusted too much. Otherwise, it will only accelerate the wear rate of the nose and mouth of the electric batch. Sixth, the vibration force of the track cannot be adjusted too much. Otherwise, the screw will easily squeeze out of the track on the screw track, which will affect the stability of the automatic screw locking machine.

If you are interested in an automatic screw locking machine, you can contact us, our website is https://www.bbamachine.com/, you are welcome to come and look forward to cooperating with you.